All Products
-
Alfred***We received the goods, everything went fine. Perfect packaging, good product quality, good price - we are satisfied. -
May***The product quality is very good, beyond my expectations, the actual use of fully meet my needs, we will buy again. -
Matthew***I bought low expansion alloy from Joy, She is a very responsible lady, Huona's products quality is pretty good.
Keywords [ copper nickel resistance wire ] match 100 Products.
Precision Manganin 13 Wire CuMn13Ni4 0.08mm Ultra-Fine Grade for High Accuracy Shunt Resistors
| Grade: | CuMn13Ni4 |
|---|---|
| Diameter: | 0.08mm (±0.002mm) |
| Resistivity (20°C): | ~0.48 Ω·mm²/m |
Type T Thermocouple Bare Wire Copper Constantan -200°C to 350°C
| Product Name: | Type T Thermocouple Bare Wire |
|---|---|
| Positive: | Copper |
| Negative: | Constantan |
Monel 400 / Tafa 70t Thermal Spray Wire 1.6mm
| Grade:: | Monel 400 |
|---|---|
| Material:: | Ni+Cu |
| Product Name:: | Thermal Spray Wire |
Eureka Enameled Wire 0.516mm Diameter 180℃ High Temperature Resistant for Motors
| Material: | Eureka (CuNi40) |
|---|---|
| Bare Wire Diameter: | 0.516mm (±0.003mm) |
| Overall Diameter (w/insulation): | ~0.58-0.60mm (depending On Coating Thickness) |
Industrial High Temperature Alloy Nimonic 75 UNS N06075/2.4951 Nickel Chromium Rod
| Product Name:: | Nimonic 75 |
|---|---|
| Density:: | 8.37g/cm³ |
| Coefficient Of Expansion:: | 11.0 μm/m °C (20 – 100°C) |
CuMn12Ni Precision Manganin Alloy Thick Wire 1.5mm for Instruments & Meters
| Alloy Grade: | CuMn12Ni |
|---|---|
| Diameter: | 1.5mm (±0.01mm, Customizable 0.8–5.0mm) |
| Resistivity (20℃): | 0.42 μΩ·m |
Ni-Cr-Al-Fe Kama Precision Resistance Alloy Foil 0.002-0.05mm Thickness 5-200mm Width for Strain Gauge Applications
| Alloy Type: | Ni-Cr-Al-Fe Precision Resistance Alloy (Kama) |
|---|---|
| Alloy Composition: | Ni 73-75%, Cr 19-21%, Al 2-3%, Fe Balance |
| Foil Thickness Range: | 0.002 Mm - 0.050 Mm (2-50 μm) |
Diameter 6.5mm 7.0mm CuMn12Ni2 Bright Manganin 6J12/6J13 Rod
| Model NO.: | 6J12 |
|---|---|
| HS Code: | 7223000 |
| Tensile Strength: | 390Mpa |
3.2mm Diameter Shielded Thermocouple Wire Thermocouple Type K Extension Cable SGS
| Model NO.: | Type K /E/T/N |
|---|---|
| Insulation Material: | Fiberglass |
| Dia: | 0.3/0.5/0.8/1.0/1.2/1.6/2.0/2.5/3.2mm |
Oxided Soft Flat Nichrome Wire ASTM Corrosion Resistant UNS N09925
| Material:: | Ni Fe Cr Mo Ti Al |
|---|---|
| Density:: | 8.08 G/cm³ |
| Condition:: | Hard / Soft |

